As technology advances, micro-cameras and pinhole cameras are less and less noticeable, and eavesdropping, sneak shots, and tracking are becoming more and more rampant, and your privacy becomes unsafe. This SQ101 is a portable self-defense equipment that is anti-sneak shot, anti-theft and self-defense alarm. With it, you will not have to worry about privacy and safety.
Small and portable, easy to operate and carry.
Built-in high sensitivity intelligent chip, the infrared scanning lamp is combined with the nano-silver filter mirror, allows the candid camera to have no place to hide.
Both wired and wireless cameras can be detected with a detection distance of 5 meters.
Large window all-around no dead angle to find the reflective red spots, regardless of whether the lens is working or not.
Suitable for hotels, toilets, car, entertainment venues, conference rooms, changing rooms, business negotiations, etc.
Large-capacity lithium battery can last up to 10 hours of continuous work, no need to worry about power.
Widely used, vibration sensing, anti-theft alarm.
Working current: 30mAh
Battery: 1 * lithium battery, 250mAh (included)
Charging time: 1-2h
Continuous working time: 9-10h
Detection distance: 5 meters
Item size: 90 * 45 * 14mm / 3.5 * 1.8 * 0.6in
Item weight: 30g / 1.1ounce
Package size: 115 * 68 * 38mm / 4.5 * 2.7 * 1.5in
Package weight: 40g / 1.4ounce
How to use:
Pinhole camera search mode: in the power-on state, short press the blink button, the infrared light flashes quickly; at this time, the eye observes through the special filter window, scan the range that needs to be checked. If you find a red reflective spot, you can press the blink button again to switch the blinking frequency of the infrared light to determine the suspicious item. Press again, the infrared light goes out.
Device alarm mode: in the power-on state, press and hold the Alarm button for 3 seconds, the right indicator flashes, and after 5 seconds, the indicator light is always on, and the alarm standby state is successfully entered. If the device is subject to vibration, touching, and position changes, an alarm will be triggered (the alarm prompt will be displayed in the form of a combination of sound and light). The alarm sound will automatically stop after 20 seconds, and then enter the alarm standby state again after stopping. Need to directly turn the ON/OFF button to shut down to end the alarm mode.
What’s in the package ????
1 * Camera Detector
1 * USB Cable
1 * User Manual